Call us at 86 15889794979

News Detail

Welcome to our website!

Introduction and use of punching machine

2018-09-15 15:12:58

Punch machine classification automatic punching machine, electric punching machine, pearl punching machine, laser drilling machine, manual punching machine
According to the number of holes: single hole punching machine, 2-hole punching machine, 3-hole punching machine, 4-hole punching machine, porous punching machine
Also according to the hole type classification, etc., not elaborated! Although there are many types of punching machines, the method of use is roughly the same. The following describes the operation method of the punching machine:

heavy duty hole punch hand held hole punch fabric hole punch
heavy duty hole punch hand held hole punch fabric hole punch

 

1. Select the punching and punching die for the required hole diameter. Installed on the host die.
2. Insert the workpiece into the die, the opening, align the scribe line, and rotate the die to clamp work.
3. Shake the handle and press the punch down to punch out the hole.

 

industrial hole punch hole puncher with different shapes
industrial hole punch hole puncher with different shapes

 


Note: 1. Check whether the punch and die are matched before operation, otherwise the host will be damaged.
2. Before punching, the die must be screwed tightly.
3. If an abnormal fault is found during the operation, the punching should be stopped and the fault should be eliminated to avoid damage to the machine.
4, screw, silk should be often oil lubricated.

hole puncher staples hole puncher ruler hole puncher office depot
hole puncher staples hole puncher ruler hole puncher office depot

 


Daily maintenance of the puncher
The punching machine should be cleaned frequently and dusted. The most important thing is to ventilate and dissipate heat, and watch the temperature of the machine in time.

LEAVE A MESSAGE